Remote keyless entry AutoStart NAHRLED4 starter transmitter starter beeper phob

Remote keyless entry AutoStart NAHRLED4 starter transmitter starter beeper phob
Remote keyless entry AutoStart NAHRLED4 starter transmitter starter beeper phob

Remote keyless entry AutoStart NAHRLED4 starter transmitter starter beeper phob

See pictures for an example of what you will receive. Aftermarket Security Installed System&###xA0;remote.

Keyless entry fob alarm beeper keyfab. Transmitter control clicker keyfob controller replacement. Interchangeable FCC ID #&###x2019;s. ANT-FM TW 122, TW-122, TW12.

Frequency: 433 &###x2013; 434 433.2. See Item Specifications for more details.

Compatible with the following Aftermarket installed security systems. Enter programming mode Using the Hood Pin. Press and hold the hood pin for 4 seconds.

The parking lights will turn ON. While the parking lights are ON, press the hood pin once more and release immediately. The parking lights will turn ON and stay ON for 20 seconds.

Before the lights go out, turn the ignition key to the ignition ON (RUN) position & immediately to the OFF position. Press & hold the "LOCK" button & keep it down until the siren chirps two times. The transmitter has been stored in memory. Each unit can store 4 remotes in its memory.

To program the transmitter on the second vehicle for multi-car operation, you must press the "trunk" button (instead of "lock' or "unlock) in step 3 of the transmitter programming procedure. Note: For vehicles that require the ignition to be turned ON to activate the brake, follow these steps. After flashing the hood, turn the ignition ON; The parking lights will turn OFF.

After 4 seconds the parking lights will turn ON and then press the brake. Note: To exit programming mode, close the hood. The Programming Assistance Button a.

The PAB is located on the side of the module. This push button mimics the hood-pin switch in order to avoid having to get out of the vehicle and pressing the hood-pin switch. The PAB will work only when the hood is up.

How to find out if this remote is compatible with your Vehicles&###x2019; installed RKE System. If you're not&###xA0;sure your vehicle can use this remote, please ask questions or contact your local dealer first. &###xA0;&###xA0; Check the back of your current or old keyless remote to match FCC ID /Part #&###x2019;s. &###xA0;&###xA0; Contact your local dealer and tell them your VIN# and ask what part # / FCC ID you need. Your vehicle will be installed with one of the following keyless entry systems.

Standard Keyless Remote Packages: Installed at time of manufacture. Optional Keyless Remote Packages: Installed by a dealer. Aftermarket Keyless Remote Packages: Installed by previous owner or a car/audio shop. No remote keyless entry system at all. The above information can change which remote you need for your installed remote keyless system.

Due to scams etc, we DO NOT respond to emails. Messages& Best Offers are checked throughout the day & we typically respond 7 days a week. We ensure proper working condition of all previously used or new remotes through a serious of tests performed with the Santronics Testing device. Does this keyless remote entry come with a battery? It will have a working battery installed. &###xA0;&###xA0;&###xA0;&###xA0;&###xA0;&###xA0;&##xA0. &###xA0;&###xA0;&###xA0;&###xA0;&###xA0;&###xA0;&###xA0; B. Installed batteries are not tested for battery life - they are simply working.

&###xA0;&###xA0;&###xA0;&###xA0;&###xA0;&###xA0;&###xA0; &###xA0; &###xA0;&###xA0; Some are new and some are used. The item "Remote keyless entry AutoStart NAHRLED4 starter transmitter starter beeper phob" is in sale since Monday, March 7, 2016. This item is in the category "eBay Motors\Parts & Accessories\In-Car Technology, GPS & Security\Dash Cams, Alarms & Security\Remote Entry System Kits".

autoparts" and is located in Wellsboro, Pennsylvania. This item can be shipped to United States.


Remote keyless entry AutoStart NAHRLED4 starter transmitter starter beeper phob