Car Alarm System PKE Keyless Entry Push Button Engine Ignition Start Remote Specifications: Material:Plastic Engine start stop: 5cm Host: 7x6x3cm Working Voltage:12V Working Current:6mA Remote control frequency:433MHZ Receive frequency:433MHZ Installation method 1: Directly remove the lock and use the buckle of the installation. Installation method 2: Remove the button behind the iron, using the paste installation method. To ACC, ON file first power supply, and then start the car 2. Long press 5 seconds to start the remote control button 3.
Remote start detection handbrake, do not pull the hand brake remote start is invalid, 4. 10 minutes after the start of remote control without operation is automatically turn off, the brake on the car to stop the flame function is canceled. Open the ACC bar first 2. At the same time press the remote control unlock key and lock key 1 seconds after release 3. Horn sound that open the induction function.
When the induction remote control is lost or damaged, then want to use the car according to the following methods: Use the spare key to open the door, find the host open and long press The host code on the switch for 5 seconds, then the speaker chirp 3, it means that anti-theft lock function will be lifted, the vehicle can use. Remote start automatically locks the door function. After each remote start or close the remote start, the system will automatically lock the door to ensure vehicle safety Package included: 1 x Car engine start button(Host) 1 x Start button 1 x 5P output cable 1 x 6P output cable 2 x Smart remote control 2 x Antenna 1 x Manual. International buyers please note: a.
The item "Car Alarm System PKE Keyless Entry Push Button Engine Ignition Starter Remote" is in sale since Tuesday, September 11, 2018. This item is in the category "eBay Motors\Parts & Accessories\Car & Truck Parts\Interior\Switches & Controls". The seller is "mhestore2009" and is located in HK.This item can be shipped worldwide.